DAWSONS-TECH most cost effective Block & Bleed Gauge Valve Series : BBGV1 is having Bar Stock Square Body design and construction with two Valves for a safe and economical method for mounting Pressure Gauges, Pressure Transmitters, Pressure Switches, etc. These two Valves Manifold combines an Isolation Valve with a vent Valve in one compact unit.
Features / Benefits :
  • Low operating torque, Anti blow-out stem.
  • Stem threads are cold rolled for smooth operation.
  • Choice of optional stem to provide greater flexibility.
  • Choice of packing PTFE or Graphite.
  • Stem packing below the threads, protects the Stem threads from system media.
  • Orifice size : 4.3mm, 6.3mm and 9.5mm, Flow Coefficient (Cv) from 0.37 to 1.8.
  • Available in Material SS316, all wetted parts in accordance with NACE MR01-75.
  • Every Valve is pressure tested.
Product Range & Operating Parameters :
  • Pressure Rating : UPTO 6000 PSIG (413 Bar) at CWP.
  • Temperature Rating :
    • : -54° C to 232° C with PTFE Packing.
    • : -96° C to 426° C with Graphite Packing.
  • End Connection -
    • Pipe Threads : 1/2" Male / Female NPT
Applications :
  • General Plant Services
  • Hydraulic & Pneumatic
  • Instrumentation Isolation,
  • Pressure Measurement Devices
Stem Type :
DAWSONS-TECH Valves are available with choice of optional stem to provide greater flexibility.

Non-Rotating (NR)  : It is standard self-centering non-rotating stem tip typically used in high cycle application to extend the Valves life.
‘V’ Stem (VS)  : It is used for general purpose liquid and gases.
Soft Seat (SF) : A soft seat stem requires a lower sealing torque. It is replaceable and suitable for temperature UPTO 120o C.
Regulating Stem (RS)  : It is used where some degree of flow control required.
Technical Data :
The temperature and pressure rating for a standard Valve with PTFE packing.

-54oC to 38oC6000413
-54oC to 93oC5160351
-54oC to 148oC4660317
-54oC to 204oC4280291
-54oC to 232oC4130289
Type Test Approvals :
The design of DAWSONS-TECH Block & Bleed Gauge Valve Series : BBGV1 have been tested to Hydrostatic Proof & Burst Test in accordance to MSS SP-99-2016a Clause 5.5 & 5.6.

Testing :
  • Standard Test - Each Valve is pressure tested with Nitrogen at 2000 PSIG (138 Bar) for leakage at the seat and packing.
  • Optional Hydrostatic Test - This Test is performed with De-ionized water at 1.5 times the working pressure.
    Certification :
    The Certificate to 3.1 acc. to EN10204 for Valves body material and pressure test will be provided on request.

    Material of Constructions :
    Sr. No.Part DescriptionMaterial
    3Valve StemSS316
    4Dust CapPVC
    5Packing Adjustment ScrewSS316
    6Lock NutSS316
    9PackingPTFE / Graphite
    10Safety PinSS316
    11Valve BodySS316
    12Drain PlugSS316

    Standard Configuration Dimensions :

    Block & Bleed Gauge Valve Series : BBGV1 (Female to Female)

    Standard Configuration Dimensions :

    Block & Bleed Gauge Valve Series : BBGV1 (Male to Female)